British Pillbox - Lincolnshire 3 bay AA Bunker (printed)

This casemate is of type Lincolnshire three-bay. During World War II, these bunkers were used for the defence of the United Kingdom against a possible enemy invasion. They were built in 1940 and into 1941

The Lincolnshire three bay pillbox is a variant form of the FW3/23. Essentially it is two of that type placed back to back and sharing an AAMG well to create a rectangular pillbox approximately 6.5m long and 2.5m wide with three fighting compartments.

The two enclosed chambers each have three embrasures, one in each external wall.

The AA well has the entrance to the pillbox which faces inland. This type of pillbox was generally used as part of the coastal crust and is found on the seawalls of Lincolnshire. In many cases they are now some distance inland as more farmland has been reclaimed from the sea.

 

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

325mm x  133mm x  130mm  @ 1/20 Scale

271mm x  110mm x  108mm  @ 1/24 Scale

186mm x  76mm x  74mm  @ 1/35 Scale

135mm x  55mm x  54mm  @  32mm (1/48) Scale

130mm x  53mm x  52mm  @ 28mm Scale

102mm x  41mm x  41mm  @ 1/64 Scale (Gaslands/Hotwheels)

90mm x  37mm x  36mm  @ 20mm (1/72) Scale

86mm x  35mm x  34mm  @ 1/76 (00 Railway) Scale

75mm x  30mm x  30mm  @ 1/87 (HO Railway) Scale

65mm x  27mm x  26mm  @ 15mm (1/100) Scale

41mm x  17mm x  16mm  @ 10mm (1-160) Scale

26mm x  11mm x  10mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.