British Type 24 Pillbox FW3-24 - WW2 Bunker (printed)

The Type 24 pillbox was a small British fortification in an irregular hexagonal shape that was designed and constructed for the expected German invasion of England in World War 2.

The official designation of this bunker was FW3/24 and had an irregular hexagonal shape with five faces of approx. 2.4m and a rear face approx. 3.96m with an entrance only 600mm wide. It came in a few varieties, the thinner walled version (walls to 15 inches thick) had rifle embrasures and thicker walled versions (24 inches thick) had pre-formed embrasures for LMG’s.

All versions of this bunker had internal blast walls some in a Y configuration and some in an X configuration, there was also often a ‘porch’ for the entrance to help protect against blasts.

Often build out of bricks there were also many of poured concrete. And versions exist designed to be shellproof with a stronger roof and thicker walls.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

303mm x  283mm x  138mm  @ 1/20 Scale

252mm x  235mm x  115mm  @ 1/24 Scale

173mm x  161mm x  79mm  @ 1/35 Scale

126mm x  118mm x  57mm  @  32mm (1/48) Scale

121mm x  113mm x  55mm  @ 28mm Scale

95mm x  88mm x  43mm  @ 1/64 Scale (Gaslands/Hotwheels)

84mm x  78mm x  38mm  @ 20mm (1/72) Scale

80mm x  74mm x  36mm  @ 1/76 (00 Railway) Scale

70mm x  65mm x  32mm  @ 1/87 (HO Railway) Scale

61mm x  57mm x  28mm  @ 15mm (1/100) Scale

38mm x  35mm x  17mm  @ 10mm (1-160) Scale

24mm x  23mm x  11mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.