German Regelbau 11 bunker (printed)

A shelter with "B-alt" resistance class, built as part of the "Limes Bauprogramm 1936-1938" program - near Germersheim. Type; Regelbau 11 (WH 29) in the German nomenclature, referred to as "Doppelgruppenunterstand mit angehängtem Kampfraum" , i.e. a shelter for 2 teams, with an added chamber of war.

Regelbau 11 was like an enlarged version of a Regelbau 10 shelter - with an additional chamber for defence of the entrance and the camp.

Shelters of this type, often built in a deep hinterland far from the first line - often served as shelters for the battalion or regiment command (Bataillons-oder Regimentsgefechtsstand) or even as sanitary shelters (Sanitätsunterstand).

Regelbau 11 facilities were built with a combat chamber on the right or left side of the shelter - which was often below or above the main shelter to prevent flanking manoeuvres. The entrance to the combat chamber was only 1.10m high - moreover, the combat chamber was not connected to the crew chambers - as a result of which it was necessary to leave the shelter outside in order to fill positions during the enemy attack.

The shelter was armed with two machine guns (MG 08 or MG 34). The shelter could hold a total of 25 soldiers. Two infantry teams of 10 soldiers and MG support of 5 soldiers.

The thickness of the walls and ceiling was; 1.5m, internal wall thickness; 2.10m. The wall thickness in the combat room was 1m and took 340 m³ of concrete to build the bunker.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

187mm x  337mm x  82mm  @  32mm (1/48) Scale

179mm x  323mm x  79mm  @ 28mm Scale

140mm x  252mm x  62mm  @ 1/64 Scale (Gaslands/Hotwheels)

124mm x  224mm x  55mm  @ 20mm (1/72) Scale

118mm x  213mm x  52mm  @ 1/76 (00 Railway) Scale

103mm x  186mm x  45mm  @ 1/87 (HO Railway) Scale

90mm x  162mm x  40mm  @ 15mm (1/100) Scale

56mm x  101mm x  25mm  @ 10mm (1-160) Scale

36mm x  65mm x  16mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.6mm nozzle at 0.3mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.