Regelbau B1-1 Small German MG Embrasure - 3D printed model
These bunkers are so-called MG embrasure stands; the crew size was 5 men. They were accommodated in fold-away beds. The main weapon was a machine gun on a table. An MG with a plate mount was planned for these bunkers, alternately an MG 34 on a gun carrier. The armour parts of the structures are primarily the plate, behind which the MG stood. The plate has a weight of 7.5 tons, is 10 cm thick and has the dimensions (width x height in cm) 370 x 270. In addition to the opening for the MG, it also has a viewing slit. Both could be closed with a slide. The slider for the MG slot has a thickness of 6 cm.
This is a multipart model and is printed in PLA
The model measures approx.:
188mm x 134mm x 67mm @28mm Scale
123mm x 81mm x 44mm @00 Railway scale
94mm x 62mm x 33mm @15mm Scale
It is designed for 28mm table top games set in WW2 such as:
Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland Warfare
The outside of the bunker is a replica based on plans and source material, the interior has been edited to make the insides usable at scale, the walls are not 2.5m thick to scale for example. The 28mm version has been adjusted to allow bases to be placed in all rooms.
If the scale you desire is not listed please contact sales to see if we can accommodate you.
Resin models are printed at 0.05mm layer height
PLA models will be printed with a 0.6mm nozzle at 0.5mm layer height.(epic will be with 0.4mm and 0.2mm layer height)
Some clean-up and finishing may be required.
Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.
Models are supplied unpainted and will be printed to order.
We use recycled packaging!
This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.