We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Deerpig Skull (printed)
SKU
DT-PR-Deerpig
£19.99
In stock
Second cousin to the jackelope.
Deerpig Skull (printed) is available to buy in increments of 1
More Great Models
-
Quad Polsten Gun with limber (printed)
As low as £4.99 -
Panzerkampfwagen V Panther PzKpfw V - Battle Damage (printed)
As low as £11.49 -
British Type 28a Pillbox FW3-28a - WW2 Bunker (printed)
As low as £2.99
-
KV-1 Russian Tank (printed)
As low as £11.49 -
British QF 3.7 inch AA gun (printed)
As low as £5.99 -
Russian 76mm divisional gun M1942 (ZiS-3) (printed)
As low as £4.99 -
A.R.S.E - RC Ammo Drone (printed)
As low as £2.99
-
10 inch medieval siege mortar (printed)
As low as £1.19 -
Dr Who - Wargames - Guards Pack (printed)
As low as £7.49 -
Bauform 246 with Panzer Turret (printed)
As low as £7.74 -
Modern Assault Rifles Scale Models (printed)
As low as £2.49
-
Juice and a Half - Liquid and Slurry Tanker (printed)
As low as £5.99 -
Regelbau VF7B (Merville Battery) - Ammunition Bunker (printed)
As low as £5.99 -
WW2 Rifle and Carbine Scale Models (printed)
As low as £2.74
-
WW2 Special Weapons Scale Models (printed)
As low as £2.74 -
Thelnetham Windmill - Tower Mill scale model (printed)
As low as £7.99 -
Regelbau B1-1a Small German MG Embrasure Bunker (printed)
As low as £3.99
Deer-pig Skull Mythical Hunting Trophy - 3D Printed Model
The Deerpig is second cousin to the jackelope and found wandering the Rad-lands.
A real taxidermy project for you.
We can print models of many other skulls and create hunting trophies for various animals, if you are insterested then drop us an enquiry.
A real taxidermy project for you.
We can print models of many other skulls and create hunting trophies for various animals, if you are insterested then drop us an enquiry.
This Model fits with any Fantasy or D&D wargaming tabletop setting.
This is a single-part model.
This is a Multi-part model.
The 3D printed Fantasy model measures approx.:
225mm x 171mm x 200mm
This Fantasy Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results.
Some Clean-up May be required.
Models are supplied un-painted.
This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.
Models are supplied un-painted.
Some Cleanup may be required.
Clean Resin with warm soapy water before painting for best reults.
This Fantasy Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results.
This Gaming Model is printed on Resin 3D printers at some scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.
Models are supplied un-painted.
Some Cleanup may be required.
Clean Resin with warm soapy water before painting for best reults.
This 3D model is designed for 28mm Fantasy tabletop gaming and take an approximate base scale of 1/50.
Other scales are available and if you don't see the scale you require please contact us with details.
Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.
This Model is designed for Fantasy table top games such as:
Dungeons & Dragons, Warhammer Fantasy Battle, Warhammer AOS, Frostgrave, pike and shotte, Confrontation, War of the Roses, Bolt Action, Song of Ice and Fire, Lord of the Rings, Runewars, Conquest, Oathmark, Marlborough's Wars, Malifaux, Banelegions, Kings of war.
We use recycled packaging!
This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.
Brand | Digital Taxidermy |
---|---|
Designer | Digital Taxidermy |
Print Material | PLA |
Genre | Fantasy |
Model Format | Display Model |
Use | Miniature, Memorabilia |
Vehicle Type | Non Vehicle |
Only registered users can write reviews. Please Sign in or create an account
No Other Seller Selling this Product
How can we help you today?
Take A Look At These!
-
Stylized Japanese - Graveyard Scatter (printed)As low as £10.49
-
Fantasy Guillotine (printed)£13.99
-
Acorn-a-corn (printed)£8.99
-
Fantasy Gallows (printed)£12.49
-
Rocks and Stones Scatter Pack (printed)As low as £18.99
Other People Also Bought These
-
Blacksmith & Forge MiniatureSpecial Price £2.99 Regular Price £3.99
-
Skull dice cup£2.99
-
Rustic Fence Panels£1.49
-
Halloween Accessories£0.00