Regelbau 502b Doppelgruppenunterstand (printed)

This is a varient on the Regelbau 502 Doppelgruppenunterstand bunker with an armored observation cupola. 
Designed to hold two groups of infantry soldiers this type of bunker was common place in the Atlantik wall and served as a forward base of operatiions for the men stationed in it. 
Containing mess rooms and sleeping quarters for the men stationed there. 

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

294mm x  189mm x  114mm  @ 28mm Scale
230mm x  148mm x  89mm  @ 1/64 Scale (Gaslands/Hotwheels)
204mm x  131mm x  79mm  @ 20mm (1/72) Scale
193mm x  124mm x  75mm  @ 1/76 (00 Railway) Scale
169mm x  109mm x  66mm  @ 1/87 (HO Railway) Scale
147mm x  95mm x  57mm  @ 15mm (1/100) Scale
92mm x  59mm x  36mm  @ 10mm (1-160) Scale
59mm x  38mm x  23mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.