Quad Polsten Gun with limber (printed)

This is a 3D printed, highly detailed Quad Polsten gun with limber.

The Polsten gun was used for armoured vehicles equipped with anti-aircraft guns based on the Cromwell/Centaur tank and for the Skink anti-aircraft tank.

Various double, triple and quadruple mounts were developed. John Inglis Limited of Toronto, Ontario in Canada produced many thousands of guns and some 500 quadruple mountings that saw limited service at the end of the war.

These multiple mounts were both trailered and truck-mounted. Polsten Guns, magazines and ammunition boxes were also made in Australia by General Motors Holden in South Australia's Woodville and Beverley Plants during WW2.

They were used by the Australian Army onshore and on small boats. Several prototype gun mountings were also developed but did not see service. This is a multipart model and has been made from plans and reference photos.

The guns and the body can be rotated as required and the limber is removable from the base.

This is a multipart model and has been made from plans and reference photos, the guns and the body can be rotated as required and the limber is removable from the base. The wheels are print in place movable parts and turn once fitted.

 At 15mm scale the guns will be in a fixed position and the model reduces to 3 parts.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting, also It fits British, Australian, Polish, United States and Canadian WW2 armies and can be used in bolt action and flames of war.

This is a single-part model.

This is a Multi-part model.

300mm x  128mm x  110mm  @ 1/20 Scale

171mm x  73mm x  63mm  @ 1/35 Scale

125mm x  53mm x  46mm  @  32mm (1/48) Scale

120mm x  51mm x  44mm  @ 28mm Scale

94mm x  40mm x  34mm  @ 1/64 Scale (Gaslands/Hotwheels)

83mm x  35mm x  31mm  @ 20mm (1/72) Scale

79mm x  34mm x  29mm  @ 1/76 (00 Railway) Scale

69mm x  29mm x  25mm  @ 1/87 (HO Railway) Scale

60mm x  26mm x  22mm  @ 15mm (1/100) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.