M75 armored personnel carrier (printed)

The M75 was in service from 1952 into the late 80s.   Towards the end of WW2 the military saw the need for a squad sized transport vehicle.  Its predecessor the very large M44 / T16 was designed for over 25 people and was difficult to maneuver due to its massive size.  In 1946 the development of the T18 started. It was based on the chassis of the T43 cargo carrier.  It received many changes over its 6 years of development before landing the designation T18E1 and was ordered into production in 1952 as the M75. 

M75 APC model includes 7 pieces in total.  Body, Cupola, MG, 2x fuel tanks, and x2 Tracks.   

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

188mm x  338mm x  197mm  @ 1/16 Scale RC tanks and models
150mm x  270mm x  158mm  @ 1/20 Scale
125mm x  225mm x  131mm  @ 1/24 Scale
120mm x  216mm x  126mm  @1/25 Scale
86mm x  154mm x  90mm  @ 1/35 Scale
63mm x  113mm x  66mm  @  32mm (1/48) Scale
60mm x  108mm x  63mm  @ 28mm Scale
47mm x  84mm x  49mm  @ 1/64 Scale (Gaslands/Hotwheels)
42mm x  75mm x  44mm  @ 20mm (1/72) Scale
39mm x  71mm x  41mm  @ 1/76 (00 Railway) Scale
35mm x  62mm x  36mm  @ 1/87 (HO Railway) Scale
30mm x  54mm x  32mm  @ 15mm (1/100) Scale

 

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.