Regelbau VF7B (Merville Battery) - Ammunition Bunker (printed)

The Battle of Merville Gun Battery occurred on 6 June 1944, as part of Operation Tonga, part of the Normandy landings, during the Second World War. Allied intelligence believed the Merville Gun Battery was composed of heavy-calibre guns that could threaten the British landings at Sword Beach, only 8 miles (13 km) away.

The VF7B was a type of ammunition bunker that is seen in many variations in the Atlantik wall. Usually, the bunker has the two main rooms and an entrance, one often containing the charges and one containing the shells. In the case of this one at Merville, there are the two storage rooms and a room opposite an internal corridor for assembly of munitions. The wing trenches are additions for this site. Merville was designed to be heavily protected from air raids and bombardments.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

320mm x  431mm x  97mm  @ 28mm Scale

250mm x  337mm x  76mm  @ 1/64 Scale (Gaslands/Hotwheels)

222mm x  299mm x  67mm  @ 20mm (1/72) Scale

211mm x  284mm x  64mm  @ 1/76 (00 Railway) Scale

184mm x  248mm x  56mm  @ 1/87 (HO Railway) Scale

160mm x  216mm x  49mm  @ 15mm (1/100) Scale

100mm x  135mm x  30mm  @ 10mm (1-160) Scale

64mm x  86mm x  19mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.6mm nozzle at 0.3mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.