Regelbau R642 Large MG and PAK 35 emplacement (printed)

The Regelbau R642 bunker is a large emplacement for MG 34 and a 4.7cm PAK 36.

The bunker was designed for the Heer (German army) and was used in the Atlantik wall during WW2 as part of fortress Europe.

This is a large bunker and has room for the main gun behind a steel embrasure and an MG team behind a steel embrasure, it also features the MG cover in 2 directions to the entrance, an ammunition store and a large living area for command or crew sleeping quarters.

On the top is a ringstand for an observer or an additional MG position.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

656mm x  504mm x  137mm  @ 1/35 Scale

478mm x  368mm x  100mm  @  32mm (1/48) Scale

459mm x  353mm x  96mm  @ 28mm Scale

358mm x  276mm x  75mm  @ 1/64 Scale (Gaslands/Hotwheels)

319mm x  245mm x  67mm  @ 20mm (1/72) Scale

302mm x  232mm x  63mm  @ 1/76 (00 Railway) Scale

264mm x  203mm x  55mm  @ 1/87 (HO Railway) Scale

230mm x  177mm x  48mm  @ 15mm (1/100) Scale

144mm x  110mm x  30mm  @ 10mm (1-160) Scale

92mm x  71mm x  19mm  @ 1/250 6mm (Epic) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.6mm nozzle at 0.3mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.