Regelbau R638 Large German medical Bunker – 3D printed model
The realization of these two blockhouses dates from the end of 1942. A divisive period for the occupying army which abandoned the idea of invading England and which in turn feared being invaded by the English army. landing considered quite plausible in Brittany, and why not on the peninsula. The Todt organization (German engineers), requisitioned foreign workers and Camarétois are hard at work to transform each strong battery into an autonomous combat unit.
Until now, the infirmaries were assigned to residential houses from which the inhabitants had been evicted and relocated by the town hall of Camaret. For the Grand Gouin battery, care was provided in the Lannic district. Regarding the Kerbonn battery , the first infirmary was in the Maury house in the hamlet of Kerbonn from July 11, 1940. The doctor had the family house emptied by putting the furniture in the courtyard and had the rooms disinfected. The house turned out to be too small because the wounded were gradually pouring in. British bombshells and German shrapnel claim victims. The doctor moved into the house of the man of the theater André Antoineon the Mountain, the artists' district which adjoins the battery and which is in all winds, facing the sea at the top of the cliff. On November 10, 1940, the infirmary returned to Kerbonn in the Pascau house, more sheltered from scattered English bombardments.
This is a multipart model and is printed in PLA
The model measures approx.:
440mm x 280mm x 101mm @28mm Scale
289 mm x 184mm x 67mm @00 Railway scale
220mm x 140mm x 50mm @15mm Scale
88mm x 56mm x 20mm @Epic scale
It is designed for 28mm table top games set in WW2 such as:
Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland Warfare
The outside of the bunker is a replica based on plans and source material, the interior has been edited to make the insides usable at scale, the walls are not 2.5m thick to scale for example. The 28mm version has been adjusted to allow bases to be placed in all rooms.
If the scale you desire is not listed please contact sales to see if we can accommodate you.
Resin models are printed at 0.05mm layer height
PLA models will be printed with a 0.6mm nozzle at 0.5mm layer height.(epic will be with 0.4mm and 0.2mm layer height)
Some clean-up and finishing may be required.
Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.
Models are supplied unpainted and will be printed to order.
Print in place parts may need some work to loosen them up after print. Once free, run them through full travel several times to wear them in.
We use recycled packaging!
This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.