My Account

Log in

Language

Currency

Basket ( )

Regelbau R634 - Armoured Machine Gun Embrasure - Octeville-sur-Mer

Regelbau R634 embrasures were gas tight machine gun positions

 

Click here for printed model

In stock
SKU
DT-STL-Bunk-R634
Special Price £6.29 Regular Price £8.99

Why Not Try

Regelbau R634 - Armoured Machine Gun Embrasure - Octeville-sur-Mer – 3D printed model

This bunker was equipped with an armoured copula with six embrasures for machine guns. The sides of the copula are 25 cm thick. The muzzle of the machine gun was mounted in a ball head which fitted exactly into the embrasures. When the embrasures were not in use, they could be closed with heavy shutters. In the top of the copula was a periscope for surveying the terrain around the bunker.

The copula is part of a type Regelbau 634 bunker. The walls and ceiling are 2m thick and offered the soldiers good protection against bombardment. In the bunker was an ammunition room and bunks for the crew of nine soldiers.

In the Iron tower there was a shooter and a helper to operate the MG 34 machine gun, which was mounted on a special foot (M.G.-Schartenlafette 34 Ks) and locked into the embrasure.

This bunker Type was designed by the Heer for 'The army'. This bunker Type is part of the Regelbau program in the Second World War.

Regelbau R634 - Armoured Machine Gun Embrasure - Octeville-sur-Mer – 3D printed model

This bunker was equipped with an armoured copula with six embrasures for machine guns. The sides of the copula are 25 cm thick. The muzzle of the machine gun was mounted in a ball head which fitted exactly into the embrasures. When the embrasures were not in use, they could be closed with heavy shutters. In the top of the copula was a periscope for surveying the terrain around the bunker.

The copula is part of a type Regelbau 634 bunker. The walls and ceiling are 2m thick and offered the soldiers good protection against bombardment. In the bunker was an ammunition room and bunks for the crew of nine soldiers.

In the Iron tower there was a shooter and a helper to operate the MG 34 machine gun, which was mounted on a special foot (M.G.-Schartenlafette 34 Ks) and locked into the embrasure.

This bunker Type was designed by the Heer for 'The army'. This bunker Type is part of the Regelbau program in the Second World War.

 

This is a multipart model.

 

The model measures approx.:

265mm x 276mm x 134mm @28mm Scale

174mm x 181mm x 88mm @00 Railway scale

132mm x 138mm x 67mm @15mm Scale

53mm x 55mm x 26mm @Epic scale

 

It is designed for 28mm table top games set in WW2 such as:

Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland Warfare

 

If the scale you desire is not listed please contact sales to see if we can accommodate you.

Resin models are printed at 0.05mm layer height

PLA models will be printed with a 0.6mm nozzle at 0.5mm layer height.(epic will be with 0.4mm and 0.2mm layer height)

Some clean-up and finishing may be required.

Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.

Models are supplied unpainted and will be printed to order.

Print in place parts may need some work to loosen them up after print. Once free, run them through full travel several times to wear them in.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

 

This is a multipart model.

 

The model measures approx.:

265mm x 276mm x 134mm @28mm Scale

174mm x 181mm x 88mm @00 Railway scale

132mm x 138mm x 67mm @15mm Scale

53mm x 55mm x 26mm @Epic scale

 

It is designed for 28mm table top games set in WW2 such as:

Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland Warfare

 

If the scale you desire is not listed please contact sales to see if we can accommodate you.

Resin models are printed at 0.05mm layer height

PLA models will be printed with a 0.6mm nozzle at 0.5mm layer height.(epic will be with 0.4mm and 0.2mm layer height)

Some clean-up and finishing may be required.

Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.

Models are supplied unpainted and will be printed to order.

Print in place parts may need some work to loosen them up after print. Once free, run them through full travel several times to wear them in.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account