Regelbau R120a Bunker

Complete your artillery bunker fortress with this observation outpost that has room for a couple of units of troops and the communications equipment required to direct an artillery battery. 

Part of the West Wall and Atlantik Wall This bunker held an important function in the infrastructure of a battery. 

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

352mm x  483mm x  180mm  @ 1/35 Scale
256mm x  352mm x  131mm  @  32mm (1/48) Scale
246mm x  338mm x  126mm  @ 28mm Scale
192mm x  264mm x  98mm  @ 1/64 Scale (Gaslands/Hotwheels)
171mm x  235mm x  87mm  @ 20mm (1/72) Scale
162mm x  222mm x  83mm  @ 1/76 (00 Railway) Scale
141mm x  194mm x  72mm  @ 1/87 (HO Railway) Scale
123mm x  169mm x  63mm  @ 15mm (1/100) Scale
85mm x  117mm x  44mm  @ 1/144 Scale
77mm x  106mm x  39mm  @ 10mm (1-160) Scale
49mm x  68mm x  25mm  @ 1/250 6mm (Epic) Scale

This STL file set is printable on FDM 3D printers such as the Creality Ender 3. Print the model with a 0.4mm nozzle at 0.2mm layer height for best results. 

Supports are not required for this 3D model.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

We have a handy scale calculator for resizing 3D printing STL files over at scale-converters.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

See the blog post notes on scales about resizing STL model files.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.

These STL files are for personal use ONLY and not to be sold or distributed to third parties in any way. Please see our terms and conditions for more information.