Regelbau 10 - Group Shelter with MG Nest

The Regelbau 10 (constructed under the Limes program) is the most frequently built bunker variant on the West Wall with over 3000 units. The attached fighting room of the bunker could be adapted to the respective terrain conditions during construction and thus ensured a high level of flexibility during construction. The slit (size 60 x 35 cm) of the combat area, made of concrete and sheet steel, proved to be disadvantageous and was included in the planning of the west wall due to a shortage of materials.

Despite the diminished combat value of the Maulscharte, these installations offered better protection from the elements, artillery fire and rifle fire than field positions or shelters, which in regard to the morale of the soldiers was not insignificant. 

In the military doctrine of the late 1930s, fighting outside the installations was favored to ensure the dynamism of one's troops. The attached combat room with its heavy machine gun was used on the one hand as an alarm post to protect the bunker crew and on the other hand it served as a combat post (usually flanking) for fire support of the bunker crew. Furthermore, the bunkers were designed in such a way that they could fire each other to cover each other and, with the combination of all loopholes, achieved an effective range of 360°.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

253mm x  219mm x  92mm  @  32mm (1/48) Scale
243mm x  210mm x  88mm  @ 28mm Scale
190mm x  164mm x  69mm  @ 1/64 Scale (Gaslands/Hotwheels)
169mm x  146mm x  61mm  @ 20mm (1/72) Scale
160mm x  138mm x  58mm  @ 1/76 (00 Railway) Scale
140mm x  121mm x  51mm  @ 1/87 (HO Railway) Scale
122mm x  105mm x  44mm  @ 15mm (1/100) Scale
76mm x  66mm x  28mm  @ 10mm (1-160) Scale
49mm x  42mm x  18mm  @ 1/250 6mm (Epic) Scale

This STL file set is printable on FDM 3D printers such as the Creality Ender 3. Print the model with a 0.4mm nozzle at 0.2mm layer height for best results. 

Supports are not required for this 3D model.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

We have a handy scale calculator for resizing 3D printing STL files over at scale-converters.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

See the blog post notes on scales about resizing STL model files.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.

These STL files are for personal use ONLY and not to be sold or distributed to third parties in any way. Please see our terms and conditions for more information.