German Regelbau FL247 Flak bunker
Keep the skies clear over your bunker fortress
German Regelbau FL247 Flak bunker - STL
The bunker model was originally designed for the navy (Kriegsmarine) and was considered a light flak stand. It has a large internal space to act as a command post, ammunition stor or a place to house units depending on the requirements. Examples of this bunker exist in France holland and Scandinavia and is approx. 11m x 18m x 5m I full scale.
This STL file is designed for FDM Printers and print with a 0.6mm nozzle at 0.3mm layer height. Epic scale will require 0.4mm nozzle at 0.2mm layer height for best finish.
Supports are not needed for this model. At larger scales these bunkers may become larger than more common build-plate sizes, you may need to cut them into sections for your machine. Please check the size below.
This model has been broken into sections with dovetail jointing to allow it to be printed on consumer printers at home.
The printed model measures approx.:
364mm x 221mm x 82mm @28mm Scale
239mm x 140mm x 55mm @00 Railway scale
182mm x 106mm x 42mm @15mm Scale
We have a handy calculator for resizing files for 3D printing over at scale-converters
It is designed for 28mm table top games set in WW2 such as:
Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland.
Now rescaled to for Flames of War, epic and 00 railways by popular demand.
See the blog post notes on scales about resizing STL files.
Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.