Regelbau R642 Large MG and PAK 35 emplacement

Regelbau R642 Large MG and PAK 35 emplacement - STL

The Regelbau R642 bunker is a large emplacement for MG 34 and a 4.7cm PAK 36. The bunker was designed for the Heer (German army) and was used in the Atlantik wall during WW2 as part of fortress Europe. This is a large bunker and has room for the main gun behind a steel embrasure and an MG team behind a steel embrasure, it also features the MG cover in 2 directions to the entrance, an ammunition store and a large living area for command or crew sleeping quarters. On the top is a ringstand for an observer or an additional MG position.

This STL file is designed for FDM Printers and print with a 0.6mm nozzle at 0.3mm layer height. Epic scale will require 0.4mm nozzle at 0.2mm layer height for best finish.

Supports are not needed for this model.

This is a very large bunker and at 1-100 scale will fit on the bed of an ender 3 however at larger scales this bunker will become larger than more common build-plate sizes, you may need to cut them into sections for your machine which can be done easily using 3d builder or mesh mixer. Please check the size below.

The printed model measures approx.:

459mm x 353mm x 96mm @28mm Scale

302mm x 232mm x 63mm @00 Railway scale

229mm x 176mm x 48mm @15mm Scale

We have a handy calculator for resizing files for 3D printing over at scale-converters

It is designed for 28mm table top games set in WW2 such as:

Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland.

Now rescaled to for Flames of War, epic and 00 railways by popular demand.

See the blog post notes on scales about resizing STL files.

Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.