Regelbau R671 Gun Emplacement
A solid place to set op your defence
Regelbau R671 Gun Emplacement - STL
The Regelbau R671 emplacement was a mass-produced bunker in German occupied Europe during WW2. There are 508 known emplacements of this type and they were built for the German army (Heer). They were designed to be used with a range of 100mm-107mm gun combinations with a 120-degree arc of fire. The design originates from spring 1943.
It required approx. 15 tons of iron and approx. 310cubic meters of concrete
This STL file is designed for FDM Printers and print with a 0.6mm nozzle at 0.3mm layer height. Epic scale will require 0.4mm nozzle at 0.2mm layer height for best finish.
Supports are required for this model. At larger scales these bunkers may become larger than more common build-plate sizes, you may need to cut them into sections for your machine. Please check the size below.
The printed model measures approx.:
192mm x 200mm x 101mm @28mm Scale
126mm x 131mm x 66mm @00 Railway scale
96mm x 100mm x 50mm @15mm Scale
We have a handy calculator for resizing files for 3D printing over at scale-converters
It is designed for 28mm table top games set in WW2 such as:
Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland.
Now rescaled to for Flames of War and 00 railways by popular demand.
See the blog post notes on scales about resizing STL files.
Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.