Regelbau R654 anti-tank 5cm KwK embrasure
5cm KwK anti tank embrasure for your bunker fort.
Regelbau R654 anti-tank 5 cm KwK embrasure - STL
The Regelbau R654 bunker is a large concrete emplacement/embrasure for a 50mm KwK anti tank gun and was build in several places in the German Atlantik wall of WW2. Notably in the fort at Saint-Nazaire in France. The bunker contains a room for the anti-tank gun, a ring-stand for an observer or machine gun post, as usual with German bunkers the entrance is covered by 2 secure internal MG windows and there is a large ammunition storage room. The used shell casings are then ejected through a small chute in the wall to a collection pit to the side of the gun room.
This STL file is designed for FDM Printers and print with a 0.6mm nozzle at 0.3mm layer height. Epic scale will require 0.4mm nozzle at 0.2mm layer height for best finish.
Supports are not needed for this model. At larger scales these bunkers may become larger than more common build-plate sizes, you may need to cut them into sections for your machine. Please check the size below.
At 28mm scale this model gets very large and may not be printable on consumer standard machines in a single piece, please see dimensions below. You may cut this model into sections for printing as required using 3d builder.
The printed model measures approx.:
366mm x 236mm x 85mm @28mm Scale
240mm x 155mm x 55mm @00 Railway scale
183mm x 118mm x 42mm @15mm Scale
We have a handy calculator for resizing files for 3D printing over at scale-converters
It is designed for 28mm table top games set in WW2 such as:
Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland.
Now rescaled to for Flames of War, epic and 00 railways by popular demand.
See the blog post notes on scales about resizing STL files.
Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.