L16 Gun Emplacement

L16 Gun Emplacement

This bunker model is part of the Regelbauten program. It is a model built in strength level: standard (St).

The bunker model was originally designed for the German Air Force (Luftwaffe).

This model is part of the application group: Flanking gun position (Flankierende Schartenstände) for 88mm Flak guns.

Bunkers in the Regelbauten and Bauformen programs were built in concrete with or without iron reinforcement. Assuming no special extensions were made, etc. 49 m³ of concrete were used in construction.

This STL file is designed for FDM 3D Printers and print with a 0.6mm nozzle at 0.3mm layer height. Epic scale will require 0.4mm nozzle at 0.2mm layer height for best finish.

Supports are not needed for this 3D print model. At larger scales these bunkers may become larger than more common build-plate sizes, you may need to cut them into sections for your machine. Please check the size below.

The printed model measures approx.:

140mm x 167mm x 75mm @28mm Scale

70mm x 83mm x 37mm @15mm Scale

28mm x 33mm x 14mm @Epic Scale

We have a handy calculator for resizing files for 3D printing over at scale-converters

It is designed for 28mm table top games set in WW2 such as:

Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda and Fallout Wasteland.

Now rescaled to for Flames of War, epic and 00 railways by popular demand.

See the blog post notes on scales about resizing STL files.

Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.