IS-1 Russian Tank - Battle Damage (resin)

IS-1 Russian Tank - STL

This is a highly detailed 3D model of a battle damaged IS-1 Russian Tank modelled by 3D fortress, prepared and distributed under license by Digital Taxidermy

In March 1943, an order specified the rearming of all frontline tanks. One of the guns intended for this was an AA gun roughly similar in performance to the German 88 mm (3.46 in), of which one had been disabled, captured and the gun analysed. This resulted in the stopgap KV-85 heavy tank, only produced in limited numbers (143 machines). This vehicle set the tone for further improvements, being the basis of the long “Iosif Stalin” series. The KV-85 turret was brand new, well adapted to the new gun designs. It could hold three men, but the hull remained basically the same KV-1 flat-armored hull first designed for the multi-turreted SMK back in 1939.

This STL file is a multipart model, at 28mm scale it can be printed on a resin printer

Supports are required for this model.

The printed model measures approx.:

66mm x 172mm x 53mm @28mm scale

We have a handy calculator for resizing files for 3D printing over at scale-converters

It is designed for 28mm table top games set in WW2 such as:

Bolt Action, Chain of Command and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

See the blog post notes on scales about resizing STL files.

Some of the images supplied are computer generated and are for reference. They are images of the files that will be 3D printed.

Print in place parts may need some work to loosen them up after print. Once free, run them through full travel several times to wear them in.