BT-5 Russian Tank (printed)

This is a highly detailed 3D model of a battle damaged BT-5 Russian Tank modelled by 3D fortress, prepared and distributed under license by Digital Taxidermy


The BT tanks (Russian: Быстроходный танк/БТ, romanized: Bystrokhodnyy tank, lit. "fast moving tank" or "high-speed tank") were a series of Soviet light tanks produced in large numbers between 1932 and 1941. They were lightly armoured, but reasonably well-armed for their time, and had the best mobility of all contemporary tanks. The BT tanks were known by the nickname Betka from the acronym, or its diminutive Betushka. The successor of the BT tanks was the famous T-34 medium tank, introduced in 1940, which would replace all of the Soviet fast tanks, infantry tanks, and medium tanks in service.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

141mm x  325mm x  144mm  @ 1/16 Scale RC tanks and models
113mm x  260mm x  115mm  @ 1/20 Scale
94mm x  217mm x  96mm  @ 1/24 Scale
90mm x  208mm x  92mm  @1/25 Scale
64mm x  149mm x  66mm  @ 1/35 Scale
47mm x  108mm x  48mm  @  32mm (1/48) Scale
45mm x  104mm x  46mm  @ 28mm Scale
35mm x  81mm x  36mm  @ 1/64 Scale (Gaslands/Hotwheels)
31mm x  72mm x  32mm  @ 20mm (1/72) Scale
30mm x  68mm x  30mm  @ 1/76 (00 Railway) Scale
26mm x  60mm x  26mm  @ 1/87 (HO Railway) Scale
23mm x  52mm x  23mm  @ 15mm (1/100) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.