KV-2 Russian Tank (printed)

This is a highly detailed 3D model of a battle damaged KV-2 Russian Tank modelled by 3D fortress, prepared and distributed under license by Digital Taxidermy

 

The Russo-Finnish war proved the soundness of the decision to manufacture the KV-1. However, when encountering difficulties on the heavily fortified Mannerheim line during the Winter War in Finland, the General Staff demanded a specially equipped version fitted with a heavy howitzer, intended to deal with concrete bunkers, in support of the regular KV-1 units. Instead of choosing the more pragmatic solution of a traditional SPG, they decided to use the same turret ring to accommodate a fully traversed, redesigned turret that housed the gargantuan howitzer. This gave the KV-2 an unmistakable profile, with its towering turret, which was only accessible by a ladder – an obvious target which was also notably top-heavy, compromising the lateral stability of the tank while crossing a sloped terrain, a problem which would later haunt Soviet tank crews. All these deficiencies were taken into account when the factory was relocated in the new “Tankograd” complex at the steps of the Ural. However, production was no longer maintained. Only 203 were built in all from late 1939 to mid-1941.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

209mm x  469mm x  209mm  @ 1/16 Scale RC tanks and models
168mm x  375mm x  168mm  @ 1/20 Scale
140mm x  312mm x  140mm  @ 1/24 Scale
134mm x  300mm x  134mm  @1/25 Scale
96mm x  214mm x  96mm  @ 1/35 Scale
70mm x  156mm x  70mm  @  32mm (1/48) Scale
67mm x  150mm x  67mm  @ 28mm Scale
52mm x  117mm x  52mm  @ 1/64 Scale (Gaslands/Hotwheels)
46mm x  104mm x  46mm  @ 20mm (1/72) Scale
44mm x  99mm x  44mm  @ 1/76 (00 Railway) Scale
39mm x  86mm x  39mm  @ 1/87 (HO Railway) Scale
34mm x  75mm x  34mm  @ 15mm (1/100) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.