Stalinets 65 Artillery Tractor (printed)

The S-65 tractor or Stalinets S-65 was a very popular agricultural tractor built by the Chelyabinsk Tractor Factory (Chelyabinskii Traktornyi Zavod – ChTZ) from 1937 until 1941. These tractors were used in military service as they were widely available and capable of towing heavy guns.

This 11 tonne tractor features a large 4 cylinder diesel engine in a prominent rectangular housing. The operator’s station was either open or enclosed and was designed for up to two crew. There were two common enclosures. One, made of wood was very rectangular while the second is an adapted cabin from a ZIS truck. The engine produced 65 horsepower and it had a top speed of 7 km/h. It is estimated it had an endurance/range of about 80 km.

 

This is a highly detailed 3D model by 3D fortress, prepared and distributed under license by Digital Taxidermy

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

134mm x  234mm x  172mm  @ 1/16 Scale RC tanks and models
108mm x  188mm x  138mm  @ 1/20 Scale
90mm x  156mm x  115mm  @ 1/24 Scale
86mm x  150mm x  110mm  @1/25 Scale
61mm x  107mm x  79mm  @ 1/35 Scale
45mm x  78mm x  57mm  @  32mm (1/48) Scale
43mm x  75mm x  55mm  @ 28mm Scale
34mm x  59mm x  43mm  @ 1/64 Scale (Gaslands/Hotwheels)
30mm x  52mm x  38mm  @ 20mm (1/72) Scale
28mm x  49mm x  36mm  @ 1/76 (00 Railway) Scale
25mm x  43mm x  32mm  @ 1/87 (HO Railway) Scale
22mm x  38mm x  28mm  @ 15mm (1/100) Scale

This WW2 Gaming Model is printed on FDM 3D printers in our workshop. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

Some Clean-up May be required.

Models are supplied un-painted.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Other scales are available and if you don't see the scale you require please contact us with details. 

Please allow 5-10 days for the model to produce, this time depends on the scale of the model, the size of the order and the current workload. While we ask you to allow this time we will attempt to get the order out within a couple of days.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

We use recycled packaging!

This does not mean you item will be treated with any less respect but it does mean less waste. See our blog post on packaging for more information.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.