Regelbau L479 Bunker

This casemate is made up of 24 rooms , organized on two floors. It measures 25 meters long by 18 m wide and 8 m high.

The different rooms are used to accommodate the services necessary for the operation of the detection and decision center. There are accommodations for staff, work rooms, a room for transmissions and ventilation. The structure is energy self-sufficient and gas-tight.


Exterior view of the L479 casemate of Cap Fréhel
There are 2 main accesses, covered by external and internal caponiers, as well as 2 anti-gas airlocks . Two openings then filled in allow the passage of bulky equipment such as the generator or reading tables for example. It has a radar

At the level of the shielding there are double-leaf doors of type 882P7 or 434P01 and single doors of type 19P7, or 26P8.

A defense tobruk Vf 58c is present 2.

This model is only the upper floor of the command bunker as the whole casemate is located underground. 

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

415mm x  248mm x  69mm  @ 20mm (1/72) Scale
393mm x  236mm x  65mm  @ 1/76 (00 Railway) Scale
344mm x  206mm x  57mm  @ 1/87 (HO Railway) Scale
299mm x  179mm x  50mm  @ 15mm (1/100) Scale

This STL file set is printable on FDM 3D printers such as the Creality Ender 3. Print the model with a 0.4mm nozzle at 0.2mm layer height for best results. 

Supports are not required for this 3D model.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

We have a handy scale calculator for resizing 3D printing STL files over at scale-converters.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

See the blog post notes on scales about resizing STL model files.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.

These STL files are for personal use ONLY and not to be sold or distributed to third parties in any way. Please see our terms and conditions for more information.