Regelbau - Bauform 206 mortar emplacement - 5cm Festungsgranatwerfer

This bunker was a small emplacement for an 5cm trench mortar, it was often found arranged as part of a battery intended for infantry support or perimeter defence of larger bunker fortresses. It had a crew of 3 men and had the mortar pit with a 360 degree rotation.

This Model fits with any Sci-fi, Dystopian, Cyberpunk, Grim Dark or Post Apocalyptic wargaming tabletop setting.

This Model fits with any WW2 or early 20th century wargaming tabletop setting.

This is a single-part model.

This is a Multi-part model.

247mm x  278mm x  172mm  @ 1/16 Scale RC tanks and models
198mm x  223mm x  138mm  @ 1/20 Scale
165mm x  185mm x  115mm  @ 1/24 Scale
158mm x  178mm x  110mm  @1/25 Scale
113mm x  127mm x  79mm  @ 1/35 Scale
82mm x  93mm x  57mm  @  32mm (1/48) Scale
79mm x  89mm x  55mm  @ 28mm Scale
62mm x  70mm x  43mm  @ 1/64 Scale (Gaslands/Hotwheels)
55mm x  62mm x  38mm  @ 20mm (1/72) Scale
52mm x  59mm x  36mm  @ 1/76 (00 Railway) Scale
45mm x  51mm x  32mm  @ 1/87 (HO Railway) Scale
40mm x  45mm x  28mm  @ 15mm (1/100) Scale
25mm x  28mm x  17mm  @ 10mm (1-160) Scale
16mm x  18mm x  11mm  @ 1/250 6mm (Epic) Scale

This STL file set is printable on FDM 3D printers such as the Creality Ender 3. Print the model with a 0.4mm nozzle at 0.2mm layer height for best results. 

Supports are not required for this 3D model.

This Gaming Model is printed on Resin 3D printers, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

This WW2 Gaming Model is printed on FDM 3D printers at some scales. The model is printed with a 0.4mm nozzle at 0.2mm layer height for best results. 

This Gaming Model is printed on Resin 3D printers at smaller scales, such as the Elegoo Mars in our workshop. The model is printed witha 0.02 to 0.05mm layer height for best results.

Models are supplied un-painted.

Some Cleanup may be required. 
Clean Resin with warm soapy water before painting for best reults.

We have a handy scale calculator for resizing 3D printing STL files over at scale-converters.

This Wargaming 3D model is designed for 28mm WW2 tabletop gaming and takes an approximate base scale of 1/50.

Bolt Action, Chain of Command, Flames of War, Axis & Allies and Konflikt ’47. It can also be used in games such as Judge Dredd, Necromunda, and Fallout Wasteland Warfare.

See the blog post notes on scales about resizing STL model files.

Some of the images supplied are computer generated and are for reference. They are images of the STL files that will be 3D printed.

These STL files are for personal use ONLY and not to be sold or distributed to third parties in any way. Please see our terms and conditions for more information.